Zonke imidlalo


Ikhaya>Izindaba >Hydrogen peroxide

hydrogen peroxide

Isikhathi: 2021-04-29 Ukushaya: 124

I-hydrogen peroxide ehlanzekile iwuketshezi olungenambala oluxubana namanzi. Ivamise ukunikezwa njengesixazululo esingu-40%(w/w) kodwa futhi itholakala kuze kufike ku-70%(w/w). Isetshenziswa ngokuyinhloko njenge-bleach.


Ukusetshenziswa kwe-hydrogen peroxide

Izici zokushibilika kwe-hydrogen peroxide zisetshenziswa ezimbonini eziningi. Mhlawumbe ukusetshenziswa kwayo okujwayeleke kakhulu kwansuku zonke kuyimikhiqizo yokuphathelene esetshenziselwa ukugeza izingubo, isibonelo kwezinye izinhlobo ze-Vanish TM. Inani elikhulu le-hydrogen peroxide lisetshenziselwa ukwenza i-sodium perborate kanye ne-sodium percarbonate, esetshenziswa njengama-bleaching agents ezihlahleni eziwuketshezi neziqinile. I-sodium perborate, i-NaBO3.4H2O, yenziwa ngokungeza i-hydrogen peroxide kusisombululo se-sodium metaborate ne-sodium hydroxide. I-sodium percarbonate ilungiswa ngokungeza i-hydrogen peroxide kusixazululo se-sodium carbonate.

Figure 1  Uses of hydrogen peroxide.


Figure 2  The kingfisher is able to feed in a previously polluted river which has been cleaned up by treating it with a solution of hydrogen peroxide.
By kind permission of Solvay.    

While its use in detergents accounts for large quantities of hydrogen peroxide, most is used in solution to bleach paper (increasing its brightness), wood pulp and fabrics.  And recently, very large plants have come on stream in Antwerp (Belgium) and at the industrial complex at Map Ta Phut (Thailand).   A third large plant is being built on the eastern seaboard of Saudi Arabia, on the Persian Gulf, at Jubail.  All three plants will produce hydrogen peroxide which will be used to make epoxypropane (propylene oxide) by direct oxidation of propene.   Epoxypropane will, in turn, be used principally to  manufacture polyurethanes.


Figure 3   A view of the Man Ta Phut petrochemical complex on the Gulf of Thailand, close to the border with Cambodia,    A plant to produce hydrogen peroxide has recently been commissioned in the complex.  It is capable of producing over 330 000 tonnes of hydrogen peroxide a year, the largest such plant in the world.  This photograph shows distillation towers used for the separation of alkanes from natural gas.  The hydrogen needed to make hydrogen peroxide is derived from the methane in natural gas.
By kind permission of Love Krittaya (Wikimedia Commons)    

Annual production of hydrogen peroxide

(expressed as H2O2 100%)

World    4.3 million tonnes1    

China    1.5 million tonnes2    

US    400 000 tonnes2    

Belgium    300 000 tonnes2    

Thailand    300 000 tonnes2    

Canada    200 000 tonnes2    

Idatha evela ku:
1.  Merchant Research and Consulting Ltd. 2015
2.  Estimated from Merchant Research and Consulting Ltd. 2015

Manufacture of hydrogen peroxide

Over 99% of hydrogen peroxide is manufactured by an autoxidation process.

Izigaba eziyinhloko yilezi:
a) hydrogenation of an anthraquinone
b) oxidation of the resulting anthraquinol
c) extraction of hydrogen peroxide solution
d) purification and concentration of hydrogen peroxide

Figure 4  A view of a manufacturing plant for hydrogen peroxide in Leuna, near Leipzig in Germany.
By kind permission of Arkema.    



The reactions are summarized in Figure 4.

(a) Hydrogenation of an anthroquinone

The 2-ethyl derivative of anthraquinone is generally used in the process.

A solution of the 2-ethylanthraquinone in a mixed solvent system containing a non-polar hydrocarbon and a polar solvent, and a suspension of a nickel or palladium-based catalyst on a solid support, is hydrogenated using hydrogen gas at ca 320 K.  Reduction to the 2- alkylanthraquinol occurs.  The catalyst is removed by filtration and recycled.

(b) Oxidation of the anthraquinol

The solution of 2-ethylanthraquinol is then oxidized by air to a hydroperoxide, which reacts in water to reform 2-ethylanthraquinone and produce a dilute solution of hydrogen peroxide.

Figure 5  Manufacture of hydrogen peroxide using 2-ethylanthraquinone.

Thus the overall reaction is:


Figure 6 The oxidiser unit for the production of hydrogen peroxide at Jarrie, south of Grenoble, France.
By kind permission of Arkema.    

(c) Extraction of hydrogen peroxide solution

Water is added to extract the peroxide as an aqueous solution containing 40% hydrogen peroxide.  The organic solvent layer is recycled to the hydrogenation unit for further reaction.

(d) Purification and concentration of hydrogen peroxide

The aqueous hydrogen peroxide solution is treated with organic solvents and by air being pumped through to remove residual quinone and solvents and produce the standard 40% product.  Some applications require higher concentration product which is produced by vacuum concentration or distillation to concentrations of up to 70%.

Hydrogen peroxide in its purest form is inherently stable.  However, if brought into contact with certain contaminants (mainly heavy metals) it can decompose.  Therefore, stabilisers are normally added to the product.  They act by complexing with any traces of transition metal ions present which would otherwise catalyse the decomposition of hydrogen peroxide.  Typical stabilisers are sodium stannate(IV) (which hydrolyzes to tin(IV) hydroxide) and various phosphates.

 Figure 7  Hydrogen peroxide solution is being unloaded, having travelled from where it was made.  It is being used to make hydrazine.  Hydrazine is used as the propellant in most satellites and as a precursor for sodium azide (a gas-forming agent in air bags) and for a variety of pesticides.

By kind permission of Arkema.



Okwedlule: Ukusetshenziswa kweHydrogen Peroxide

Okulandelayo: Green propulsion through H₂O₂ in rocket